1.1 Layout Planning - Layout Structure

Your colleagues have sketched a draft of the layout structure based on the existing layout planning (see figure below).

Please switch to the "Layout Editor" submodule.

It is possible to import the layout of a factory and to structure the areas and combine them into functional areas (example: goods receipt or assembly) in the Layout Editor. By creating different layout levels and then assigning material areas, the desired layout structure can be created. 

In ipolog, your colleagues have already started to build the structure.

Complete the layout structure according to your colleagues' design. The first step is to create the two missing layout levels. To do this, select the "Hall" as the parent level and then click "Insert Layout Level". A new level will be added as the last entry in the list.

1. Pre-Assembly Cockpit

2. Floor Storage

The next step is to assign all the corresponding surfaces to the two layout levels. First, select the layout layer to which you want to add a plane. Then click the lower icon in the toolbar. Then click the corresponding area you want to add to a layout level. Repeat this process until all surfaces are assigned to the appropriate layout level.

Tip: You can make multiple selections using a snap frame. To do this, use the Shift and right mouse buttons. Holding both down creates a frame. All areas within the frame will be selected or deselected.

Select the layout level to the Pre-Assembly Cockpit and select the surfaces.

Repeat the steps for the Floor Storage.

Save your progress.