ipolog Factory Viewer: Module Bar

All functions necessary to work with ipolog Factory Viewer are displayed in the module bar. If you move the cursor over an icon, the name of the module is displayed.

1. View from top changes the current view to a bird's eye view, which shows you the entire planning area from above.

2. toggles between Walk Mode and Fly Mode. In fly mode, you can move freely through your project. In Walk Mode, you must first select a point in your project from which you want to start. The height selection and the toggle to return to fly mode thus appear in the module bar:

Fly mode is selected by default.

3. & 4. switches back and forth between View Mode and Annotation Mode. In view mode, you can move freely through your project - depending on which mode you selected at [2]. The Annotation Mode offers the possibility to make notes on individual elements - such as areas, workers or even shelves.

5. Toggle Quicksearch allows you to search and find all elements contained in the project:

These can be searched for either by name or type.

6. Toggle Viewpoint List opens or closes the list of viewpoints you have saved in your Factory Viewer planning space. Further information here: Viewpoints.

7. Show/Hide Transport Network shows or hides the previously defined transport network in your project.

8.  Show/Hide Transport Routes shows or hides the previously defined transport routes through your project.

9. Show/hide Transport Activity Indicators shows or hides the transport route usage.

10. Show/hide Box Volume on Areas shows or hides the display of the load on individual areas based on the box volume level.

11. Enable/Disable Box Volume Charts shows you the utilization diagram for the container volume. To activate this option, the “Show Box Volume on Areas” option must be selected in ipolog 4 Material Flow during import.