From release 2019-03 the IPO.Cloud will be delivered with the MSI Installer.

This manages the connection to your ipolog Cloud Server.

Note:

You don't need a Start .cmd or config.ini file anymore.

The link to the server can be obtained from your ipolog contact person. After the installation of ipolog 4 Material Flow there is now the application IPO.Cloud. You will also receive a link to connect the application to the server.

By default, it runs in autostart mode and connects after logging in from Windows.

You will find the cloud in the Windows icon bar after you have started ipolog 4 Material Flow.

IPO.Cloud application

You can open the cloud by double-clicking on the icon described above from the Windows start bar.

This screenshot shows a successfully connected cloud. The status of the connection is "Online".

Set up proxy

Under the Proxy Settings you can enter your proxy settings.

Please enter your proxy URL and username / password and press "Apply".

Then you can connect to the server via "Connect".

If the setup is successful, the cloud shows the status "Online".

Language

You can change the language via "Right Click" on the tray icon to English or German

FAQ

Error: ipolog Material Flow does not connect to the server.

Answer: Please check if the IPO.Cloud has connected to the server.

If the IPO.Cloud displays a yellow icon with "Connect", it currently has no server connection. Please check if you have a connection to the Internet and have set up your proxy correctly (see "Setting up a proxy").

If the cloud is successfully connected, the icon is colored blue.

In addition, the cloud displays "Online".